These rails allow installation of 2.5inch disk drives in a 3.5inch drive bay

Dell F9541 / NF467 / H9122 / G9146 / MF666 tray / caddy - Brand New for SAS / Serial SCSI / SATA Hard Drives for Dell PowerEdge 1900- 1950- 2900- 2950- 6900- 6950 Servers and PowerVault MD1000 and MD3000 Storage Arrays.

Brand New Dell Original with screws

NOTE: for SATA drives with interposers (optional not required) the CC852 tray is required instead. SATA drives in the MD1000 require interposers and the CC852 tray

Dell (Original) CC852 tray / caddy for mounting SATAu / SATA u drives in Dell PowerEdge servers with SAS backplanes. An interposer is also required to adapt the drive to the backplane. Compatible with PowerEdge 2900- 2950- 6900- 6950 Servers and PowerVault MD1000 and MD3000 Storage Arrays.

Brand New Dell Original with screws

NOTE: This is the correct tray if you plan to use a SATA interposer for dual path / controller redundancy. A PN939 interposer board is also required

NOTE: for SAS drives or for SATA Drives without interposer order the F9541 tray

Dell PN939 / HP592 SATA Interposer board for usage with CC852 trays / caddies to be used with SATA / SATAu Hard Drives in Dell PowerEdge 2900- 2950- 6900- 6950 Servers and PowerVault MD1000 and MD3000 Storage Arrays.

Brand New Dell Original

Dell (Original) KF248 SFF Small Form Factor 2.5inch caddy - Brand New for SAS / Serial SCSI / SATA Hard Drives for Dell PowerEdge 1900- 1950- 1955- 2900- 2950- 6900- 6950 Servers

Brand New Dell Original with screws

Dell J3240 SATA Hard Drive Tray/Caddy used for the PowerVault 745N and more w/ screws - Previously used

Accepts one standard low-profile (1/3 height) SATA hard drive measuring 5.75inch x 3.5inch x 1inch (LxWxH).

HP Compaq Proliant 3.5inch SATA/SAS hard drive Tray / Caddy CPN: 373211-001 - Brand New

Compatible with the following Compaq Proliant systems using 3.5inch disks (this list is not all inclusive): DL140 G2 - DL140 G3 - DL145 G2 - DL145 G3 - DL320 G3 - DL320 G4 - DL320 G5 - DL320s - DL360 G4p - ML110 G3 - ML150 G3 - ML310 G3 - ML310 G4 - ML350 G4p - ML350 G5

HP Compaq SFF Small Form Factor 2.5inch SATA / SAS drive Tray / Caddy CPN: 378343-002 - Brand New

Compatible with the following Compaq Proliant systems (this list is not all inclusive): BL20p G4 - BL25p G2 - BL45p G2 - BL460c - BL465c - BL480c - BL685c - DL360 G4p - DL360 G5 - DL365 - DL380 G4 - DL380 G5 - DL385 G2 - DL580 G3 - DL580 G4 - DL585 G2 - ML350 G5 - ML370 G4 - ML370 G5 - ML570 G3 - ML570 G4

IBM 3000 Series 3.5inch SATA / SAS Hard Drive Tray / Caddy 42R4129 / 42R4131 for xSeries 3250- 306m- 3400- 3455- 3500- 3550- 3600- 3650- 3655- 3700- 3755- 3800- 3850 - Brand New OEM

IBM 31R2239 2.5inch SCSI / SAS Hard Drive Tray / Caddy. Original IBM tray for xSeries 336- x336 and SFF (Small Form Factor) Servers & Storage Systems. Specifically compatible with the following IBM drives: 26K5654- 26K5655- 32P0796- 32P0797- 40K1052- 40K1037- 40K1051 and others

Brand New with Screws

This tray will accept any 2.5inch SAS / SATA hard drive.

Dell 4K423 caddy / tray is for mounting one IDE hard drive in a PowerEdge 1650 Server.

This is an original Dell part- with dell part number and four screws to mount your hard drive

Accepts one standard low-profile (1/3 height) IDE hard drive measuring 5.75inch x 3.5inch x 1inch (LxWxH).

Dell (Original) CC852 tray / caddy for mounting SATAu / SATA u drives in Dell PowerEdge servers with SAS backplanes. The PN939 interposer is also included to adapt the drive to the backplane. Compatible with PowerEdge 2900- 2950- 6900- 6950 Servers and PowerVault MD1000 and MD3000 Storage Arrays.

Brand New Dell Original with screws

This tray/interposer will accept any 3.5inch x 1.0inch SATA /SATAu hard drive that has standard SATA 1.5Gbps or 3.0Gbps interface.

520 Watt single EPS PSU 1U Seasonic SS-520H1U - 520W

TST cable for Seasonic SS-520H1U only

600 Watt single EPS PSU 2U Seasonic SS-600H2U - 600W

TST cable for Seasonic SS-600H2U only

500 watts 2U power (1+1) Zippy R2W-6550P - 550W R

HDD caddy black

Additional 2.5inch internal IDE HDD caddy - 1 installed - 3U, 4U, 5U

Additional 2.5inch internal SATA HDD caddy - 1 installed - 3U, 4U, 5U

Additional 2 x 3.5inch internal HDD caddy & y cable ESR316

Additional 3.5inch internal HDD caddy 4U, 5U

Cable SFF8087 - SFF8087 mini-sas to mini-sas

Cable SFF8484 - SFF8087 mini-sas

Cable SFF8484 - PTP

Cable SFF8484 - SFF8484

Cable SFF8484 - SFF8484 SAS32F 90 degrees roundcable

SAS backplane SFF8087 ( mini SAS / iSAS connector )

SAS backplane SFF8484

Mounting plate to convert a 2.5inch drive into a 3.5inch SATA drive - as used in the 3.5inch Memoright models.